Table of Contents |
---|
About Density
...
Within Soil Classification you can define a Lower and Upper Moisture Tolerance for all soil classifications. You will also need to add the soil classification Codes used by your organization. For each soil classification you can further define moisture testing requirements specific to that classification.
Suppliers
Under Suppliers (withing Density Testing) you can you can add the various bituminous suppliers within your service area. You also can associate bituminous plants as well as bituminous mix designs with each supplier.
Things to keep in mind:
- A supplier must exist in the system before a plant or mix design can be added for that supplier.
THIS SECTION NEEDS MORE WORK
Standards
Under Density Testing, you can identify the standard (such as an ASTM or DOT) specific to sampling or testing in field density. These choices will display in Field, allowing the user to identify the standard that was followed.
Info | ||
---|---|---|
| ||
You can select a standard to default in the field by selecting the default option. If multiple standards are added for the same measurement, a user will be able to override the default in Field. |
Test Administration
The Test Administration area allows you to move Soil Density tests to other projects or delete them. This screen is very wide due to the amount of data shown in the table (similar to the Soil QC table). Depending on your computer’s screen resolution, some scrolling may be necessary to see everything.
...