Versions Compared

Old Version 4

changes.mady.by.user Joel Smolarek

Saved on

compared with

New Version 5

changes.mady.by.user Joel Smolarek

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Reviewing Specimens

1.Select To Review on the left hand navigation. Then select Cast Cylinders.
2.Optional: Select a specimen and edit the test results using the Edit Results button.
3.

Select one specimen and select the Revert Test Results button.

  1. A pop up will appear saying test results will be removed and the specimen will return to the testable queue. Select Yes.
    Note that the test disappears from the To Review queue and is now in the Testable queue.
4. Navigate back to LIMS using the breadcrumb controls at the top of the page (Breadcrumbs appear as:  Home > LIMS > Concrete Work Queues > Sample Review).
5.Select the LIMS > Concrete Work Queues link.
6.Back in LIMS > Concrete Work Queues, make sure you are still in the To Review queue.
7.Select one of the specimens to tested above (it will have a Test Date = today), and approve the test results using the Approve button.

...

  
1.From the MetaField Main Menu, navigate to LIMS > Cast Cylinder Diameter Averages
2.Use the filters at the top of the page to specify the Lab, specimen size, and date that you would like to enter measurements for.
3.Select Search to determine if measurements have already been added.
4.

If no measurements have been added, select Add Measurements.

  1. Enter in Diameter 1 and Diameter 2 measurements for the number of specified specimens
  2. Select Save.

Info
titleNOTE

The system will automatically populate the number of measurements needed to calculate the daily average based on the number of specimens that need to be tested.

5.

Optional: Navigate to LIMS > Concrete / Grout / Mortar and select the To Test queue in the left navigation pane.

  1. Select Cast Cylinders directly underneath To Test.
  2. Filter on the Lab and specimen size you entered your cylinder diameter measurements for and select Search.
  3. Select a specimen or two and select Enter Test Results.
    1. Notice that your Diameter 1, Diameter 2, and Average Diameter fields are pre-populated.
  4. Select Cancel and navigate back to the LIMS main menu.

 

Soil Proctor Results

Add a Proctor

1.Navigate to LIMS > Soil Proctor Results.
2.

Add a Proctor using the Add Proctor button. At a minimum, supply the following required fields:

  1. Project Number (proctors may only be entered for active projects).
  2. Assign it a Proctor ID.
  3. Soil Classification (defined in the Administrative module).
  4. Optimum Moisture (%).
  5. Maximum Density (pcf).
3.

Optional: Define any other fields you wish to include information on. A few of the fields need to be defined elsewhere first such as:

  1. Standards, Methods, Source, and Geologic Origin (defined in Administration > LIMSs > Soil Proctors)
  2. Family Curve (defined inLIMS > Soil Proctor Results > View Proctors > Add Family Curve For This Project)
4.Save the Proctor.
5.Return to the LIMS main screen.

...