Table of Contents |
---|
Labs
You define your laboratory testing locations in Labs. This list will populate Field Check-in and Lab screens. At least one lab must be defined in MetaField.
...
When data from concrete specimen testing is entered in the Lab component, Lab users will specify a code representing the type of capping method used.
The values in the Capping Method dropthe Capping Method drop-down list are defined on the Capping Method sub the Capping Method sub tab.
A Description and Standard Standard for each Capping Method code can be entered. Both will display in a legend when a concrete report is created.
Click to enlarge image.
Remarks
When concrete testing data is entered into Lab, users must select a Break Remark code for each specimen. The code and associated description will be displayed on concrete reports.
The values for Break Remarks available in Lab are maintained on the Break Remarks sub tab in Administration / Labs.
Field | Description |
---|---|
Sample Type |
|
Code |
|
Description |
|
Info | ||
---|---|---|
| ||
Code: D2 Description: The 28 day test result meets or exceeds the 28 day specified strength. |
You can also generate a list of Active remark codes and descriptions by selecting Print Active Remarks.
Click to enlarge image.