...
- Select the name of the Sand Cone you wish to use for the test.
- Depending on the Sand Cone selected, the Sand Cone test will default according to which calibration Method ( A or B ) was used.
- In some cases, a Sand Cone may be calibrated via Method's A & B. In this case, the user will be allowed to select the appropriate Method to use in Field.
- Surface Condition will default to Smooth. If the surface of the test is Rough, switch this field to Rough Surface - Alternate Test Method and MetaField will adjust accordingly.
- Select the Oversize Rock Correction check box to apply a correction factor to the Max Dry Density (pcf) and Optimum Moisture (%). The system will automatically mark this true if a proctor has been selected where the Lab has indicated that Field rock corrections are needed. This can be overridden if a rock correction is not needed.
Entering Moisture Content Data
...