Application Area | Change / Deployment Note | Value | Video / Screen Shot Click To Enlarge | Jira Links | Last Updated | ||
---|---|---|---|---|---|---|---|
Administration - Concrete/Grout/Mortar | Added “Sampling Method” and “Sample Condition” to General Settings
| These repositories can be used to store the values for these respective lists so these data points can be included on your C/G/M samples and meet standards requirements | 01/04/22 | ||||
Administration - Offices and Labs | Added the country field to office and lab addresses
| Providing ability to specify the country of a lab or office | 01/19/22 | ||||
Administration - Work Items | Work Item grid is sorted by A-Z by default | Easier to find Work Items by default if a custom sort has not been applied | 01/05/22 | ||||
Field - Manage Samples | Added the “Uncollected” status and will only appear if there are Uncollected specimens | Allows for filtering on the Uncollected specimen status and provides the opportunity to Pick Up or Check In specimens that were incorrectly designated as Uncollected specimens | https://agileframeworks.atlassian.net/browse/AGILE-3358 | 12/02/21 | |||
Field - Sampling (DIY) | Issue resolved that created a situation where specimen numbers would be duplicated when adding specimens | Specimen numbers will no longer be duplicated in certain situations | None | 01/03/22 | |||
Field - Specimen Check In | Only active labs will display for selection | List of labs will be shorter and only active labs can be selected from | 12/02/21 | ||||
Field - Change Specimen Count | Fixed field rendering issue when performing Change Specimen Count actions | Consistent user interface | 12/07/21 | ||||
Field - Sampling | Updated UI/Font size for Lab and Check In By pick lists on the Batch Specimen Check-In form | Consistency | None | 01/06/22 | |||
Form Designer | For CGM Sample Forms, the specimen size will no longer default to a size if multiple defaults exist - the user must pick | Avoids situations where a default specimen size (where multiple options exist) is not unknowingly accepted | None | 01/05/22 | |||
Form Designer | Data Source Added - Bituminous Material | The Bituminous Material values can be mapped to a pick list and available for selection on a form | 12/02/21 | ||||
Form Designer | Data Source Added - Bituminous Lab Results | The Bituminous Lab Results values can be mapped to a pick list and are available for selection on a form | 12/03/21 | ||||
Form Designer | Data Source Added - Standards: Soil Moisture | The Soil Moisture Standards can be mapped to a pick list and are available for selection on a form | None | 12/27/21 | |||
Form Designer | Added a new LOOKUP source for Bituminous Lab Results that can pull back the following fields:
| These additional metadata fields can be returned to a form after selecting a Bituminous Lab Results value | None | 12/03/21 | |||
Form Designer | Added a “Display as Checkbox” setting for the Yes/No Field Type
| Form designers have more control over the UI to display Y/N fields as a simple check box versus Yes / No slider | 01/06/22 | ||||
Form Designer | Density Test - Bituminous Nuclear Gauge has been added as a Form Setting for DIY Activity Forms - this can only be added once the user has selected the appropriate UoM has been applied | Form designers can build a form that contains the necessary system fields and settings for a bituminous nuclear gauge test | 01/06/22 | ||||
Form Designer | CGM Sample Specification Forms - Added a “Draft Value” option on Supplier / Plant / Mix Design fields when the respective datasources are applied to these fields | Users can now add a new draft value to these DIY Sample forms |
| 12/27/21 | |||
Form Designer | “Remove Specification Limit Operators From Reports” is now correctly in Upper Case | Simple user interface cleanup / consistency | 12/02/21 | ||||
Form Designer | Expression Builder - Lookup Sources now alphabetized | Logical order to Lookup Sources | 01/03/22 | ||||
Form Designer | Changing proctor values will now refresh the underlying metadata that is displayed | Proctor metadata displayed is accurate and representative of the selected proctor | None | 01/04/22 | |||
Form Designer | Various Lookup Source Changes #Proctors Lookup Source - Added additional fields that can be returned as lookup fields for a proctor record
#Gauges Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge record
#GaugesStandardization Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge - standardized record
| These additional metadata fields can be returned to a form after selecting a Proctor value | https://agileframeworks.atlassian.net/browse/AGILE-3374 01/12/22 | ||||
Form Designer | Added the ability to use calculations on Y/N field types | Allows for conditional logic to be used to set a Y/N field to either of the values | 12/27/21 | ||||
Form Designer | If a Sample form contains the Form Setting: CGM Sample Specification, and a user were to select the following Sample Types: Batch Log, Density Test, Grout Batch Log, or Grout Field Test, the “Specimens” section will no longer appear on the form. | Specimens aren’t collected with the sample types Batch Log, Density Test, Grout Batch Log, and Grout Field Test, therefore there is no need for this section in the Sample form | https://agileframeworks.atlassian.net/browse/AGILE-3477 | 01/06/22 | |||
Form Designer | Issue resolved that prevented sieve size labels from adjusting when a form’s chart axis scale was adjusted | Sieve size labels will appear in the correct position on the X axis | 01/12/22 | ||||
Form Designer | Test Forms - Test Age calculated column added to all Test form designs - shows the planned test age until tested and then shows the actual test age | Allows for Test Age to be included on reports, form-specific data grids and batch entry data grids | 01/16/22 | ||||
General | MotionPoint proxy site links are added to the user preference drop down in the header and the login splash page | Supports easy navigation for users using the French language site | 1/19/22 | ||||
Integration - ProjectData API | TimeZone field has been added to the project data API’s Project endpoint | The new time zone field will allow integrations to update the project time zone in project specification | None | 01/17/22 | |||
Integration - ProjectData API | Country field has been added to the project data API’s Project and Client endpoint | The new Country field will allow integrations to specify the country value in the address of a project or client | None | 01/17/22 | |||
LIMS - Bituminous Results | Updated the grid in Bituminous Results to append the unit of measure to the field value | Conserves grid space by allowing for one column to be used for varying units of measure | 12/02/21 | ||||
LIMS - Bituminous Results | Updated the fields in Bituminous Results under the “Add Bituminous Density” button to include a unit of measure - the unit of measure that is selected will be defaulted based on the project default (if defined), and then the global default if not defined on the project level | Allows for both imperial and metric Max Density values to be stored based on the screen’s defined unit of measure | https://agileframeworks.atlassian.net/browse/AGILE-3362?filter=11050 | 12/06/21||||
LIMS - Bituminous Results | Renamed “Max Wet Density” to “Max Density | Aligns the label with the real value stored in this field (it is not a “wet” density. | 12/27/21 | ||||
LIMS - CGM Work Queues | Issue resolved that caused an incorrect user to be logged in the History pop up when making a change to a test age | Records the accurate user who made the change | None | 12/27/21 | |||
LIMS - Other Materials Work Queue | Issue resolved where using the Enter key on an open form being edited ended up displaying related test forms instead of saving the form record | Allows for the form being edited to save when the Enter key is used - as intended | None | 12/22/21 | |||
LIMS - Other Materials Work Queue | The DIY test sheet introduced in 2021.5 now supports a column which displays prior test results for a given sample | DIY test sheets now have full parity with discrete bench sheets. | https://agileframeworks.atlassian. | net/browse/AGILE-322501/19/22||||
Project Administration - Upload Projects & Upload Clients | Upload Projects and Upload Clients instructions updated to include Province | Clarity added to the upload instructions for any projects / clients being uploaded that contain a Canadian (province-based) address | 12/02/21 | ||||
Project Administration - Projects and Clients | Added Country field to the address definition of Project and Clients | Provides specification of country in which the project or customer resides. | 01/19/22 | ||||
Quality Control - Concrete/Grout/Mortar | Added Sampling Method and Sample Condition to C/G/M forms and the Compressive Strength report | This additional field is for ASTM standards | 1/04/22 | ||||
Quality Control - Sampling | Batch test reporting functionality added to generate multiple test reports based on the selected samples | Multiple (like) test reports can be generated efficiently for selected sample records | 01/16/22 | ||||
Quality Control - Sampling | Spacing added between Sample grid label and button bar | Simple user interface cleanup / consistency | 12/02/21 | ||||
Quality Control - Sampling | User is now only able to select SAMPLE reports and not test reports when generating a sample report in Quality Control / Sampling | Users are not presented with reports that don’t apply for the sample context | 01/04/22 | ||||
Report Designer | “Test List Report” property added to designate if the report design is used to generate a customized test list | Shows only Test List reports when generating a Test List and omits these types of reports when generating other report types | 12/10/21 | ||||
Report Designer | Issue resolved that caused data grids and images to be removed from a report preview if the Allow Distinct Headers / Footers report setting was set to Yes | Reports with this setting will render data grid and images as expected | 12/22/21 | ||||
Scheduling - Pending Field Action | If Activity Form Setting Density Test (Soil Nuclear Gauge or Bituminous Nuclear Gauge) is marked YES for Retest, the test will be inserted into Scheduling / Pending Field Actions | Provides a means for a failed SNG density test (requiring a retest) using a DIY form to be queued as a Pending Field Action in the Scheduling system | 12/02/21 | ||||
Scheduling - Work Item | New Work Item called Retest - Bituminous Density has been added | Allows for failing bituminous density tests to be queued / scheduled using a distinct work item | 12/20/21 |
Copyright © 2022. Agile Frameworks, LLC. All Rights Reserved. Proprietary and Confidential.
...