Versions Compared

Old Version 10

changes.mady.by.user Tracie Karsjens

Saved on

compared with

New Version Current

changes.mady.by.user Molly Sweeney

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Table of Contents
Table of Contents

Purpose

The Sample Tracking Work Queues section of LIMS is used to process generic samples that have been checked into the lab and need to be tested. The following workflow functions are performed in this module:

  • Specimens are "received" into the lab (after field technicians check specimens into the lab)
  • Tests are assigned to specimensTest reports (PDF) are attached to lab test records / configurable test forms are filled out within the application
  • Tests are performed and results recorded on configured forms
  • Test results are reviewed and approved from a lab perspective

...

  • and made available for reporting in the Quality Control module

Image Added

Filter Pane

The filter pane can be used to filter the underlying queue data by a variety of variables. Filter controls that appear are configured in the Administration module by your MetaField administrator. Filter sets can be saved for future use in the Select A Filter pick list. To provide more screen space, the filter pane can be collapsed using the arrow on the right side of the header bar.

Image Added

Left Navigation

Image Added

Tip

The left navigation pane can be exposed / hidden by using the button with the three lines to the left of bread crumb links.

...

Image Removed

Common Grid Icons

Image Added

IconDescription
Pencil
  • Edits the test information

Image Added

X
  • Deletes the record

Image Added

  • Displays sample / specimen (field) data
  • Data is editable with the appropriate permission level
Folder
  • Opens lab (test) documents related to a test

Image Added

Image Added

  • Displays a list of reports a test is reported on
  • Only available in the Done queue

Image Added

  • Displays Lab instructions assigned to the sample
  • Only available in the To Receive and Tests To Assign queues

Work Queues

To Receive

The To Receive queue shows all specimens that have been checked into the lab but have not been "received" into the lab workflow yet.

ButtonDescription
Receive Specimen
  • "Receives" the specimen into the lab workflow
Add / Split Specimen
  • Adds additional specimens to the sample (or splits the large specimen into smaller ones)
  • Example: Large bag of aggregate is received and it needs to be split into smaller specimens that need to be tested with a mix of tests

Image Removed

Print Receiving List
  • Prints a paper receiving list that can be used to audit the receiving process in the lab

Image Added

Change Lab

  • Specimen can be
moved
  • associated to another lab if checked into the incorrect lab by mistake
No Tests For Specimen
  • Marks a specimen as having no lab tests and will terminate its workflow in the lab
View Field Data
  • Displays a pop up that allows for data collected in the field to be reviewed
  • "i" icon on the right side of the data grid
Image Removed
Add Specimen
  • Adds an additional specimen to the selected sample

Image Added

Add Sample
  • Adds a brand new sample - user is ported to the Quality Control module to enter the sample
  • Useful when samples are dropped off in the lab by contractors where field staff was not involved in gathering the sample / specimens

Tests To Assign

The Test To Assign queue shows all specimens that have been received into the lab workflow that need to have specific lab tests assigned to them.

ButtonDescription
Add
Assign Test
Adds a lab test to a selected specimen
(s)
  • User is able to see the requested tests (Lab Instructions) and "assign" a test to a particular specimen
  • Can optionally create new specimens during the assignment process - "splitting a specimen" (i.e. a large bag of soil arrives from the field and divided into smaller specimen sizes for testing)
  • Multiple lab tests can be associated with one specimen (i.e. specimens that are tested multiple time and not destroyed during the previous test)
  • As tests are added to the specimen, they will appear in the grid below the Test To Assign grid until the queue is refreshed and the specimen and associated tests fall out of the queue
  • The following fields are supplied when adding a test to a specimen...

    • Image Removed

    Info

    Test Cost is optional and only used by firms that track their billable test costs. These costs can be exported in the Billing module later.

    Change Lab

    See Change Lab Above

    View Field DataSee View Field Data Above

    See the Assigning Tests sections below for detailed information on how tests are associated with specimens.

    Change Lab

    See Change Lab Above

    Add Specimen

    See Add Specimen Above

    Add SampleSee Add Sample Above

    Assigning Tests

    Info

    The general premise of the test assignment process is to indicate which specimen you want to execute the requested tests on. In addition, this process allows you to systematically split a specimen along with retaining a portion of a sample / specimen for future testing needs.

    Click the Assign Tests(s) button to see a list of requested tests for the selected sample (sample number displayed above the grid). You should select at least one specimen to begin the test assignment process. If multiple specimens are selected (not necessary), they must be from the same sample. The following screen will appear and be pre-populated with the tests "requested" when the sample was logged. Additional tests can be added by clicking the Add Test button above the grid.

    Image Added

    The following table outlines some of the fields / controls available on the Test Assignment screen.

    Field / ControlFunction
    Add Test (Button)
    • Adds an additional test that needs to be performed
    Apply Test Group (Button)
    • Adds a grouping of tests that can be assigned at once.
    • Optional
    • Test Groups can be maintained in Administration > LIMS/Samples > Test Groups. For more information, see the LIMS/Samples - Test Groups page.
    Specimen Number (Field)
    • Allows you to assign a test to a particular specimen by selecting a stand alone number (existing specimen number) in the pick list
    • Allows you to systematically create a new specimen / split a specimen by selecting a "New Split _" item in the pick list
    • Multiple tests can be assigned to a given existing or new specimen

    Image Added

    Info

    Specimen numbers will default based on the selected specimens from the Tests To Assign work queue grid.


    Test (Field)
    • Specific test that needs to be performed
    Info

    If project-specific tests are defined in Project Administration (Specifications), only those defined tests will be displayed to the user in this pick list.


    Comments (Field)
    • Comments regarding the requested test from the Lab Instructions
    Test Duration (Field)
    • How many days it takes to perform the test
    • Optional - Will only display if it is defined on the Test form in Administration
    • Helpful when determining the Test Age / Test Date to assign to the test
    Specimen Size (Field)
    • Size of the specimen the test will be performed on
    • Will default if the Default Test Specimen Size is defined on the Test Form properties in Administration
    Test Age (Field)
    • Test Age (days from the Sample Date) the test should be performed (start)
    • Interrelated with the Test Date - if the Test Date value changes, the Test Age will recalculate
    Test Date (Field)
    • Date the test should be performed (start)
    • Interrelated with the Test Age - if the Test Age value changes, the Test Date will change
    Lab Technician (Field)
    • Lab Technician assigned to perform the test
    • Optional
    Test Notes (Field)
    • Specific notes / instructions for the lab technician
    • Defaults from Specifications if defined
    Test Cost (Field)
    • Customer cost to perform the test
    • Defaults from Specifications or Administration if defined
    • Optional
    Billing Test Code (Field)
    • Accounting code associated with the test
    • Defaults from Test Form properties if defined
    • Can be variable based on test specific data using calculation rules defined on the form field
    Billing Test Quantity (Field)
    • Quantity that is associated with the test for accounting purposes
    • Defaults to 1
    • Can be variable based on test specific data using calculation rules defined on the form field
    X (Button)
    • Deletes the test / Lab Instruction record
    Specimen To Retain For Future Testing (Field)
    • Defines the specimen number that should be retained for potential future use / future tests requested on that sample
    • You can't assign a specimen number to a test on this screen if it has been designated for future use
    Save (Button)
    • Saves the Test Assignment screen and associates the defined tests with the appropriate specimens
    • Systematically splits specimens and creates new specimen records as needed
    Cancel (Button)
    • Cancels the Test Assignment process
    Batch Fill Controls (Button)
    • Applies the same value to all tests in the grid
    • Added to the majority of columns in the grid
    • Optional

    Image Added

    Testable

    The Testable queue shows all tests that are waiting for the test date to arriveTest Date to arrive. This will include tests in progress with a Next Test Action Date and no Test Completed Date where the Next Test Action Date is in the future.

    Info

    The Testable queue is now displaying tests instead of specimens.


    ButtonDescription
    Add Test

    See Add Test Above

    Modify Test Date

    • Test Date can be changed for a test

    Image Modified

    Change Lab
    • Specimen can be associated to another lab if checked into the incorrect lab by mistake
    Print Early Test List
    • Prints a report of the tests schedule for a future test date
    View Field Data
    Add Specimen

    See

    View Field Data

    Add Specimen Above

    To Test

    The To Test queue shows all tests where the test date equals the current system date or prior. Overdue tests are highlighted in a red shading.
     

     

    This will include test in progress with a Next Test Action Date and not Test Completed Date where the Next Test Action Date = system date (today).


    ButtonDescription
    Complete
    Enter Test Results
    Used to indicate that
    • Opens the test
    is complete
  • Data related to the test can be supplied
    • Tested By
    • Date Test
    • Test Results (narrative summary / notes)
    • Upload supporting lab reports (PDF files)
    • Mark a test as Untested
    • View / update test costs

    • Image Removed

    Info

    If your test is based on a configured test form, you will be presented a screen to fill in the data fields configured in the test configuration in the Admin module.

    Warning
    titleFireFox Browser

    If you are using FireFox there is a known issue preventing the uploading of files. You will need to use a different browser, such as Chrome or Internet Explorer, to perform this function.

     

     

    • form to enter test data / results
    • If multiple records for the same test form are selected, a batch entry grid will display to enter results (if the test form is configured for batch entry)
    Add Test

    See Add Test Above

    Print Test List
    • Prints a report of the tests schedule for today
    Complete Test - Copy Prior Test Data
    • Used copy test results from the most recent test for that specimen into the test form of the current test being executed
    • Only applies to a configurable test form

    Image Removed

    View Field DataSee View Field Data
    Add SpecimenSee Add Specimen Above


    To Review

    The To Review queue shows all completed test that are awaiting lab review and approval.

    ButtonDescription
    Approve
    • Marks the test as "Approved" (Approve By, Date Approved)
    • Changes the status of the test (in QC) from Lab-Review to Analyzed
    • Project manager is alerted in their Dashboard queue
    • Only users with appropriate permissions can approve LIMS results
    • User will be asked if they want to generate a batch report (can be generated across multiple projects)
    Add Test

    See Add Test Above

    Revert
    Edit Test
    Results
    • Removes any test data and puts the test record back in the Testable or To Test queue
    View Field Data

    See View Field Data Above

     
    • Opens the test form to edit test data / results
    • If multiple records for the same test form are selected, a batch entry grid will display to enter results (if the test form is configured for batch entry)
    Open In QC
    • Opens the test in QC
    Add Specimen

    See Add Specimen Above

    Preview Report
    • Generates a preview of the test report
    Preview Average Strength
    • Displays the average compressive strength values


    Done

    The Done queue shows all tests that have been completed and approved in the lab. The queue will default to the most recent 30 days of tests, but can be broadened or narrowed if needed.

    ButtonDescription
    Revert Test Results
    • Removes any test data and puts the test record back in the Testable or To Test queue
    Open In QC

    See Open In QC

    • Opens the test in QC so a report can be created
    • Button displays only if user has rights to the Sample Tracking - QC module
    Tip

    Lab technicians that need to create reports (versus project managers) should have access to Sample Tracking - QC, as that is where reports are created

    View Field DataSee View Field Data Above

    Above

    Add Specimen

    See Add Specimen Above

    Create Batch Report
    • Allows for LIMS reports to be created in batch across multiple projects at one time


    Tip

    A Report Status filter exists to filter tests based on if they have been reported or not. A Reported On grid icon appears at the right side of the grid to see which reports a given test was included on.