Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Table of Contents

Purpose

The Equipment module is used to store a high level inventory of equipment used in a materials laboratory. The module will also track if equipment needs to be calibrated or not, when it was calibrated and what the configurable calibration values were. The Equipment screen is broken down into the following sections.

SectionDescription
Equipment Type
  • High level grouping of the different equipment types / groups
Equipment
  • Listing of the individual pieces of equipment belonging to a selected Type
Calibration
  • Listing of the calibrations performed on a pieced of equipment
  • Only appears if the Calibrated field on the equipment = Yes
Calibration Data Point
  • Individual data points (measurements) for the calibration

Equipment Type

Click Add Equipment type to add a type / grouping of equipment.

Equipment

After an Equipment Type is selected, you will see the pieces of equipment belonging to that Type. Click Add Equipment to add a new piece of equipment to that Type.

FieldDescription
Name
  • User friendly name for the piece of equipment
  • Required
Code
  • Internal code / asset code for the equipment
Manufacturer
  • Manufacturer of the equipment
Serial Number
  • Serial number of the equipment
Model Number
  • Model number of the equipment
Lab
  • Lab the equipment belongs to
  • Required
Calibrated
  • Indicates if the equipment needs to be calibrated
Description
  • Open ended description (notes) of the equipment

Equipment Calibration

 

Calibration Data Point

 

  • No labels