Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Purpose

The Material Specifications module is used to define and create specifications for different materials that can then be referenced in DIY Forms and Reports.  Each specification can contain one or more Variants, and each Variant can contain multiple value specifications.

In MetaField 2.13 the only specification type present is the Sieve Test, with additional test types coming in 2.14.

 

Specifications


FieldDescription
Name
  • Name given to the specification
Specification Type
  • The type of test that the specification is associated with. Note, in MetaField 2.13 the only Specification Type available is Sieve Test
Materials
  • The material types that the specification is associated with.  Each test can be associated with one or multiple material types
Specification Value


Variants 


How to set up Material Specifications

Step NumberDescriptionExample
1.Navigate to 'Admin/ LIMS / Samples / Material Specifications' and click on the "Add Specification" button.

2.

Enter the desired information for the specification:

Name: Name given to the specification.

Specification Type:  The type of test that the specification is associated with. Note, in MetaField 2.13 the only Specification Type available is Sieve Test.

Materials: The material types that the specification is associated with.  Each test can be associated with one or multiple material types.

Specification Value: The value/parameter that the specification is going to use to evaluate measurements. 


3.Add the number of variants that you would like to use inside the specification.  Note you can always add more variants at a later time.

4.Finally enter
5.





  • No labels