Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
Table of Contents

About QC - Concrete

...

  • This section of QC allows you to review Concrete Tests as well as build and finalize reports.
  • When you first start using QC, you will need to search for a project from the project search panel.  Recent projects you have worked with will display below for easy access. 
  • Select View Tests to open the project and see the associated Tests.

...

StatusDefinition

Draft

Sample has been saved, but has incomplete data.

Logged

Specimen is ready to be Picked Up and/or Checked In.

Picked Up

Specimen has been “Picked Up” by a Field user and not yet checked into the lab.

Checked In

Specimen has been "Checked In" to lab for testing.

Analyzed

Testing is complete and test results are available. Review process may begin.
"Picked Up" step not required
Info
title

The Pick Up step is not a required step in Field. Specimens can jump straight from Logged to Checked In.

...

StatusDefinition

Review

Optional status that can be applied to any specimen that requires further review before reporting.

Complete

Applied when test data review is complete and the specimen is ready for reporting.

Uncollected

Specimens were never Picked Up or Checked In from the field.

Tip

If a specimen is incorrectly marked as Uncollected in Field, a Quality Control user can set the status back to Logged.

 

Info
titleReports

A specimen cannot be reported on a lab / specimen report until it's status is set to Complete. Draft samples can't be added to any report.

Tip
titleReview Status
  • The use of the "Review" status can be determined by each business using MetaField.
  • A common use of the "Review" status is used to indicate that the QC user has started to review the Specimen, but is not yet ready for reporting.

...