Versions Compared

Old Version 3

changes.mady.by.user Christy Kolle

Saved on

compared with

New Version 4

changes.mady.by.user Christy Kolle

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
Table of Contents

About QC - Concrete

...

  • This section of QC allows you to review Concrete Tests as well as build and finalize reports.
  • When you first start using QC, you will need to search for a project from the project search panel.  Recent projects you have worked with will display below for easy access. 
  • Select View Tests to open the project and see the associated Tests.

...

Specimen Statuses - Automatically Assigned

...

StatusDefinition

Draft

Sample has been saved, but has incomplete data.

Logged

Specimen is ready to be Picked Up and/or Checked In.

Picked Up

Specimen has been “Picked Up” by a Field user and not yet checked into the lab.

Checked In

Specimen has been "Checked In" to lab for testing.

Analyzed

Testing is complete and test results are available. Review process may begin.

...

Specimen Statuses - Manually Assigned

...

StatusDefinition

Review

Optional status that can be applied to any specimen that requires further review before reporting.

Complete

Applied when test data review is complete and the specimen is ready for reporting.

Uncollected

Specimens were never Picked Up or Checked In from the field.

Tip

If a specimen is incorrectly marked as Uncollected in Field, a Quality Control user can set the status back to Logged.

 

...

StepDescriptionExample
1.

Select Quality Control on the home screen, then select Concrete.

 


Click image to enlarge.

2.Search for the project that includes the Samples you'd like view.

 

Tip
titleRecent Projects

Recently opened Projects are stored beneath the Search Panel.


Click image to enlarge.

3.Selecting View Samples  will open the Sample Review  screen where every Sample for that project is displayed on the Concrete Samples table.


Click image to enlarge.

4.

Directly under the Concrete Samples table is the Concrete Specimens table.

  

Tip
titleConcrete Specimens Table

In order to display the Concrete Specimens table you want to review,make sure the according Concrete Sample row has been selected (row is blue).


Click image to enlarge.

 

 

Tip
titleField Notes

If there were Field Notes recorded about the Sample, a Comment icon will be shown on the far right end of the table.


Click image to enlarge.

Info
titleSpecimens Display
  • The Specimens displayed in the Concrete Specimens Table are related only to the Sample which is currently highlighted on the table above. 
    Therefore, you can only view Specimens for one Sample at a time.
  • The check boxes on the left end of the Concrete Samples table are used for creating reports, not for controlling what appears on the bottom Concrete Specimens table.


Click image to enlarge.

Related Samples

...

 

If a sample is related to another record, this relationship will be indicated on the QC grid.

...

Click image to enlarge.

Concrete Specimens Table

...

 

Above the Concrete Specimens table are two buttons:  View Break Remarks & View Fracture Types.

Click image to enlarge.

...

Info
titleConcrete Pour Summary Report Information
  • Reports field information for all sample types
  • Reflects information related to the pour observed, such as truck & ticket numbers, admixtures, etc.
  • If a sample was cast, adding the sample type will report the number of specimens cast.

Create Pour Summary Report

StepDescriptionExample
1.Mark the check boxes in the Concrete Samples table for and Samples to be included.

Click image to enlarge.

2.Select Preview Pour Summary Report or Preview Specimen Report (pending which report is being created) to validate the content.

Click image to enlarge.

3.Finalize Report to generate the report and save it in the Deliverycomponent.

Click image to enlarge.