...
To update a test status, check the box next to one or more tests and select Set Status.
Image Removed
Image Added
Click image to enlarge.
NEW IMAGE NEEDED FOR OVEN BURN
| Tip |
|---|
| title | Changing Status of Multiple Tests |
|---|
|
Select the top checkbox to select all tests in the current view at one time. |
...
| Info |
|---|
| title | Complete Status and Reports |
|---|
|
Only Tests in the status of Complete may be added to a report. |
| Status | Definition |
|---|
Analyzed | - This status is automatically assigned by MetaField after all required test data has been entered and calculations can be performed.
- This status may also be manually set by a user in QC (except were the Test status is Pending and test calculations have not been performed).
|
Pending | - MetaField will automatically assign this status if all required fields are entered but test results cannot be calculated.
- You may also manually assign this status in QC.
|
Complete | |
Review | |
...
| Step | Description | Example |
|---|
| 1. | Go to Quality Control and select Density Testing. | 
Click image to enlarge. |
| 2. | Select the desired project. If you have previously been working in MetaField, the last project selected will display. To view another project, click Change Project. | 
Click image to enlarge.
|
| 3. | Verify that the test status of those you want to include on your report are set to Complete. | |
| 4. | Check the box next to desired tests. | Tip |
|---|
| Use the bottom table controls to expose more tests on the page. You can only add tests from a single page. 
Click image to enlarge. |
| 
Click image to enlarge. |
| 5. | (Optional) You can view your report by clicking Preview Report. | 
Click image to enlarge. |
| 6. | There are two options when adding tests to a report: 6.A. Select Draft Report button. This will create a report and send this report to the Draft Review portion of Quality Control.
In order for the report to be sent to Delivery, the report will need to be Finalized from Draft Reports. 6.B. Select Finalize Report button. This will create a report and send this report to Delivery. | 
Click image to enlarge. |
| 7. | Depending on which button is selected and how your Business Administrator has configured your reports, you may see some of the options below. | Field | Description |
|---|
| Report Note | - Enter a note that will display on the final report
- Maximum number of characters is 25
| | Alternate Title | - This field will only display if the report has been configured by your Business Administrator to allow Alternate Titles
- If allowed, this is an optional field
| | Report Label | - Select a Report Label from the dropdown
- Report Labels are controlled by your Buisness Administrator
- This is required field
| | Digital Signature | - This option will only appear if your Administrator has permitted this type of report to be digitally signed
- This option will not appear when creating a Draft Report
|
| 
Click image to enlarge. |
View Legend
To view all of the Test Remark Codes and applicable Test Modes used in MetaField select the View Legend button. These codes and descriptions will also display on Density Testing reports.
Image Removed
Image AddedClick to enlarge image....