Table of Contents | |
---|---|
|
...
Info | ||
---|---|---|
| ||
Only tests in the status of Complete or Pending can be reported. |
Status | Definition |
---|---|
Analyzed |
|
Pending |
|
Complete |
|
Review |
|
...
Step | Description | Example | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1. | Go to Quality Control and select Density Testing. | |||||||||||||||
2. | Select the desired project. If you have previously been working in MetaField, the last project selected will display. To view another project, click Change Project. | |||||||||||||||
3. | Verify that the test status of those you want to include on your report are set to Complete. | |||||||||||||||
4. | Check the box next to desired tests.
| |||||||||||||||
5. | (Optional) You can view your report by clicking Preview Report. | |||||||||||||||
6. | There are two options when adding tests to a report: 6.A. Select Draft Report button. This will create a report and send this report to the Draft Review portion of Quality Control. 6.B. Select Finalize Report button. This will create a report and send this report to Delivery. | |||||||||||||||
7. | Depending on which button is selected and how your Business Administrator has configured your reports, you may see some of the options below.
|
Info | ||
---|---|---|
| ||
Upon creating a density report, the option to include / exclude the Optimum Moisture Tolerance column on the report will be presented. |
...