...
Info |
---|
|
Only tests in the status of Complete or Pending can be reported.
|
Status | Definition |
---|
Analyzed | - This status is automatically assigned by MetaField after all required test data has been entered and calculations can be performed.
- This status may also be manually set by a user in QC (except were the Test status is Pending and test calculations have not been performed).
|
Pending | - MetaField will automatically assign this status if all required fields are entered but test results cannot be calculated.
- You may also manually assign this status in QC.
- Tests with a status of Pending can be included on a report.
|
Complete | |
Review | |
...
Step | Description | Example |
---|
1. | Go to Quality Control and select Density Testing. |
|
2. | Select the desired project. If you have previously been working in MetaField, the last project selected will display. To view another project, click Change Project. |
|
3. | Verify that the test status of those you want to include on your report are set to Complete. | |
4. | Check the box next to desired tests. Tip |
---|
| Use the bottom table controls to expose more tests on the page. You can only add tests from a single page.
|
|
|
5. | (Optional) You can view your report by clicking Preview Report. |
|
6. | There are two options when adding tests to a report: 6.A. Select Draft Report button. This will create a report and send this report to the Draft Review portion of Quality Control. In order for the report to be sent to Delivery, the report will need to be Finalized from Draft Reports. 6.B. Select Finalize Report button. This will create a report and send this report to Delivery. |
|
7. | Depending on which button is selected and how your Business Administrator has configured your reports, you may see some of the options below. Field | Description |
---|
Starting Report Number | - Only displays if report numbering is turned on for your organization and this is the first report created for this project
- Allows you to set the first number for this report type. If no value is added, system will start with 1.
- Enter a whole number from 1-999,999
| Report Note | - Enter a note that will display on the final report
- Maximum number of characters is 25
| Alternate Title | - This field will only display if the report has been configured by your Business Administrator to allow Alternate Titles
- If allowed, this is an optional field
| Report Label | - Select a Report Label from the dropdown
- Report Labels are controlled by your Business Administrator
- This is required field
| Description | - This field will default to the test numbers added to the report
- You may type in an alternate description
- Description is for internal use only and will not display on the report
| Digital Signature | - This option will only appear if your Administrator has permitted this type of report to be digitally signed
- This option will not appear when creating a Draft Report
|
|
|
Info |
---|
|
Upon creating a density report, the option to include / exclude the Optimum Tolerance column on a density report will be presented. Image Added Image Added |
View Legend
To view all of the Test Remark Codes and applicable Test Modes used in MetaField select the View Legend button. These codes and descriptions will also display on Density Testing reports.
...