...
If the project you are working with has already had samples logged to it, you will see the details regarding the last logged sample. This This may be helpful in determining the next set number for you to record on your cylinder molds. Concrete specimens saved in Samples saved as a Draft status will not display in this section.
Image RemovedImage Added
...
Sample Section
After you have selected a project to work with, Sample Type (Add Sample button) you will be taken to the main concrete sample screen. Depending upon the Sample Type you select, buttons to various screens will be exposed below.Image RemovedSample screen.
Image Added
Field | Description |
---|
Sample Type | - Select Visual reference to the appropriate type that matches the activity you are performingThis is a required fieldsample type selected
|
Technician | - Select the person who is performing these tasksthe work
- Defaults to logged in the current user
- This is a required field
|
Date Logged / Cast | - Record the date by typing in a value or selecting from the calendar
- This is a required field
|
Pour Placement Location | - Select corresponding location from the drop-down
- List is controlled by your MetaField Business Administrator
- This is a required field
|
Location Details | - Type in additional location information
- 500 character limit.
- This is a required field
|
Longitude | - Longitude (in degrees) where the activity is happening
Info |
---|
Up to 8 decimal places are allowed in the longitude value. |
|
Latitude | - Latitude (in degrees) where the activity is happening
Info |
---|
Up to 8 decimal places are allowed in the latitude value. |
|
Project Location ID | - Client defined field to identify granular site locations based on business process.
- This information displays in QC only, not on reports.
|
Specifications
After you have completed the main Concrete Sample screen, select Specifications. This is the area you would record the various project specifications for your Concrete Sample.
|
Alternate Sample / Set # | - Used to store an alternate / cross-reference sample and set number
- Optional and not used very often
|
Specifications Section
Field | Description |
---|
Specified Strength Modulus of Rupture | - Enter the Specified Strength for the ConcreteDisplays for Sample Type Cast Cylinders, Truck Log and Field Testsample
- Defaults if defined in Project Specifications
- Modulus of Rupture
- Enter the specified Modulus of Rupture
- Displays for Sample Type Beamonly applies to Beam sample types
|
Specified Strength Test Age | - Test Enter the test age for the specified strengh / modulus of ruptureSpecified Strength (i.e. 28 days)
- Defaults if defined in Project Specifications
|
Min/Max Wet Unit Weight Min/Max Dry Unit Weight | - Enter unit weight specifications
- Displays for Sample Type Density Test sample types
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Air Limit | - Enter specifications related to air contentAir Content low / high limit specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Slump | - Enter specifications related to slump
|
...
- Slump low / high limit specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Spread | - Spread low / high specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Flow Cone Limit | - Flow Cone low / high specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Cone Penetration Limit | - Cone Penetration low / high specifications
- Defaults if defined in Project Specifications
|
Notes & WBS
This screen allows you to enter notes pertaining to the current sample. These notes are only internal notes that can be viewed in the Quality Control module. In addition the project work breakdown structure for this field transaction can be defined along with the number of hours spent on this work.
...