Page Comparison

Purpose

The Concrete / Grout / Mortar QC section allows you to review Concrete / Grout / Mortar samples and their specimens along with preparing reports.

Image Modified

Selecting Projects

You will need to search for a project from the project search panel.  Recent projects you have worked with will display below for easy access. Select View Samples to open the project and see the associated samples.

...

Control	Purpose
	Opens the sample record so it can be edited (sample grid) Allows for report comments related to a specimen to be added (specimen grid) Allows for a specimen to be excluded from the test age average calculation (specimen grid) Tip title Specimen Grid Edits If the Test Age and/or Hold indicator for a Specimen need to be edited, they must be edited prior to the Specimen being "Checked In" If the change needs to be made after this point, the lab must be notified directly Lab results can't be modified in the QC module - they must be changed in the Lab module Tip title Editing Date Cast Date The Cast / Logged Date for a sample may be edited until one more specimens has been checked-in to Lab. Once a specimen has been checked-in, this date cannot be changed unless you have the elevated Manage Concrete Sample Date permission that grants you access to change the date.
	Indicates there are Field Notes that are part of the sample record Field Notes are not reportable and visible (at the bottom) if you edit the sample record
	Indicates if the sample is related to another sample Typically used if you are casting more than one type of sample type from a given sample of concrete (i.e. casting some cylinders and creating a beam)
	Shows the reports that a sample / specimen has been reported on
	Allows for pickup information (curing metadata) to be modified
	Allows for check in data to be modified

...