...
Fields reported in the Sample section of the Asphalt Lot report need to be mapped to the form fields. This is accomplished by applying the Asphalt Lot Report setting to a field on the sample form and selecting (mapping) the form field to the report field applicable to the Sample section of this report.
- Form Design - Test Forms
Sample forms used for asphalt lot reporting need to have a few settings applied to them. Application of these settings will enable fields from that test form to appear in the appropriate section on the Asphalt Lot Report.\
Lot Aggregations - Averages / Formulations / Deviations / Requirements
Data appearing under the grids containing data for the multiple tests belonging to a lot is sourced from a variety of areas.
Data | Notes |
---|---|
Average |
|
Formulation |
|
Measured Deviation |
|
Allowable Deviation |
|
Critical Deviation |
|
Minimum Requirement |
|
Maximum Requirement |
|
Report Design
The Asphalt Lot Sample Report is the report that aggregates the defined sample and test fields together on a single report for a given asphalt lot number within a given project. This report is a hard coded report that is not based on a custom report design within Report Designer. Administrators can control the report settings of the report, but they can't control the look of the overall report design.
...