Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Fields reported in the Sample section of the Asphalt Lot report need to be mapped to the form fields.  This is accomplished by applying the Asphalt Lot Report setting to a field on the sample form and selecting (mapping) the form field to the report field applicable to the Sample section of this report.

Test Form

...

Settings -

...

Sieve Report Section

Test forms used for asphalt lot reporting need to be identified and need to have a few settings applied to them.

...

Test Form Settings - Sieve Report Section

text here

...

These settings and field mappings are outlined below.

Form SettingNotes

Test Material

  • Designates the material the test form is for
  • Standard on all tests - not unique to lot analysis
Material Specification
  • Designates the the type of material specification used on this report - sieve material specification should be used
Asphalt Lot Test - Sieves
  • Designates that this form can be used as a source of data for the Sieve section of the lot analysis report
Material Specification
  • Designates the the type of material specification used on this report - sieve material specification should be used

Field Mappings - Sieve Report Section

...

Sourced DataNotes
Sieve Size Columns
  • Dynamic based on the sieve sizes associated with the material specification selected on the form record
  • Sieve sizes reported in metric screen size value (mm)
Percent Passing
  • Dynamic based on the material specification value for the selected material specification on the form record

Image Added

Test Form Settings - Mix Analysis Report Section

Test forms used for asphalt lot reporting need to be identified and need to have a few settings applied to them. These settings and field mappings are outlined below.

Form SettingNotes
Test Material
  • Designates the material the test form is for
  • Standard on all tests - not unique to lot analysis
Material Specification
  • Designates the the type of material specification used on this report - sieve material specification should be used
Asphalt Lot Test - Mix Analysis
  • Designates that this form can be used as a source of data for the Mix Analysis section of the lot analysis report

Image Added

Field Mappings -

...

Mix Analysis Report Section

Fields reported in the Mix Analysis section of the Asphalt Lot report need to be mapped to the form fields.  This is accomplished by applying the Asphalt Lot Report setting to a field on the sample form and selecting (mapping) the form field to the report field applicable to the Mix Analysis section of this report.

Image Added

Test Form Settings - Gyrations Report Section


Field Mappings -

...

Gyrations Report Section

Field mappings are not required for the Gyrations section of the Asphalt Lot report. Because the target fields are predicable and sourced from the material specification selected on the form form record, the system is able to source the appropriate data dynamically from the form design and material specifications assigned to that form.

Sourced DataNotes
Gyration Count Columns
  • Dynamic based on the material specification values associated with the material specification selected on the form record
Voids At "X" Gyrations
  • Material specification value for each tested gyration count (voids at "x" gyrations)

Image Added

Lot Aggregations - Sources of Data

...