...
Purpose
The Specimen Settings tab section is used to store information about default test age age, field cure and hold values for each sample type / specimen size.
Image Removed
Click image to enlarge.Image Added
Specimen Settings
Field | Description |
---|
Sample Type | - Sample type of the specimen
|
. |
Specimen Size | - Specimen size of the specimen
- Configure your Specimen Sizes Here.
|
Default Test Age | |
. |
Default Field Cure | - Indicates if the specimen should be cured in the field
|
. |
Default Hold | - Indicates if the specimen should be held in the lab
|
.
Info |
---|
For example, if you needed to define a default set of cylinders that you typically pour to be broken at 7, 14 and 28 days with one of the 28 day cylinders held in the lab as a backup, your Specimen Settings grid would contain the following data... Sample Type | Specimen Size | Default Test Age | Default Field Cure | Default Hold |
---|
Cast Cylinder | 4" X 8" | 7 | No | No | Cast Cylinder | 4" X 8" | 14 | No | No | Cast Cylinder | 4" X 8" | 28 | No | No | Cast Cylinder | 4" X 8" | 28 | No | Yes |
|
Tip |
---|
- Defaults can be changed / overridden in the Field module.
- Settings can be defined at the for a specific project level in Project SpecificationsCGM Specifications. Project Specification settings trump Admin settings.
|