Table of Contents

Purpose

The Specifications section stores the specifications related to a sample. Specifications defined in Project Specifications will default on this screen. Otherwise, this section can be used to enter specifications in the field.

Specifications Section

Field	Description
Specified Strength Modulus of Rupture	Enter the Specified Strength for the sample Modulus of Rupture only applies to Beam sample types
Specified Strength Test Age	Enter the test age for the Specified Strength (i.e. 28 days)
Min/Max Wet Unit Weight Min/Max Dry Unit Weight	Enter unit weight specifications Displays for Density Test sample types
Lower / Upper Specified Air Limit	Air Content low / high limit specifications
Lower / Upper Specified Slump	Slump low / high limit specifications
Lower / Upper Specified Spread	Spread low / high specifications
Lower / Upper Flow Cone Limit	Flow Cone low / high specifications
Lower / Upper Cone Penetration Limit	Cone Penetration low / high specifications

The following screen shot only displays some of the specification fields. The fields presented will vary based on the selected sample type.

Browser not supported