...
Form Setting | Notes | ||
---|---|---|---|
Sample Material |
| ||
Asphalt Lots |
|
...
|
...
|
Field Mappings - Sample Report Section
...
Field mappings are not generally required for the Sieve section of the Asphalt Lot report. Because the target fields are predicable and sourced from the material specification selected on the form form record, the system is able to source the appropriate data dynamically from the form design and material specifications assigned to that form. Any comments you wish to display on the report must be mapped to the Sieve Test Remarks field mapping.
Sourced Data | Notes |
---|---|
Sieve Size Columns |
|
Percent Passing |
|
...
To map a text field to the Remarks section of the report, use the Sieve Test Remarks mapping.
...
Test Form Settings - Mix Analysis Report Section
...
Fields reported in the Mix Analysis section of the Asphalt Lot report need to be mapped to the form fields. This is accomplished by applying the Asphalt Lot Report setting to a field on the sample form and selecting (mapping) the form field to the report field applicable to the Mix Analysis section of this report.
...
Any comments you wish to display on the report must be mapped to the Mix Analysis Remarks field mapping.
Test Form Settings - Gyrations Report Section
Test forms used for asphalt lot reporting need to be identified and need to have a few settings applied to them. These settings and field mappings are outlined below.
Form Setting | Notes |
---|---|
Test Material |
|
Material Specification |
|
Asphalt Lot Test - Gyrations |
|
...
Field mappings are not required for the Gyrations section of the Asphalt Lot report. Because the target fields are predicable and sourced from the material specification selected on the form form record, the system is able to source the appropriate data dynamically from the form design and material specifications assigned to that form. Any comments you wish to display on the report must be mapped to the Gyration Remarks field mapping.
Sourced Data | Notes |
---|---|
Gyration Count Columns |
|
Voids At "X" Gyrations |
|
Info |
---|
To map a text field to the Remarks section of the report, use the Gyrations Remarks mapping. |
Lot Aggregations - Sources of Data
Data appearing under the grids containing data for the multiple tests belonging to a lot is sourced from a variety of areas.
Data | Notes | Example |
---|---|---|
Average |
| |
Formulation |
| |
Measured Deviation |
| |
Allowable Deviation |
| |
Critical Deviation |
| |
Minimum Requirement |
| |
Maximum Requirement |
|
...
Report Design
The Asphalt Lot Sample Report is the report that aggregates the defined sample and test fields together on a single report for a given asphalt lot number within a given project. This report is a hard coded report that is not based on a custom report design within Report Designer. Administrators can control the report settings of the report, but they can't control the look of the overall report design.
...