Page Comparison

Table of Contents

Table of Contents

Setting Density Project Specifications

Info

title	Blank Project Specifications

If any field is left blank, the defaults (global settings) specified within MetaField Administration will be used.

Field Instructions

Any information added to this box will display to Field users for all Density Tests
Percent Compaction Decimal Precision
The decimal precision of the % Compaction calculation for both soil and bituminous tests can be controled controlled here for the project (if different than the global specification)
Options = Whole Number of Tenth (Whole Number is the default)

Soil Density Test Specifications

You can enter specific moisture and soil classification specifications on a project level or for a specific soil classification and/or loctionlocation
Specifications entered here will be applied to Field as follows in this order / priority:
1. System will look for a match on Location and Soil Classification
2. System will look for a match on Location
3. System will look for a match on Soil Classification
4. System will look for a global project setting (no Location or Soil Classification)System will look at Admin at Admin (global) settings
These fields only apply to Soil Nuclear Gauge, Sand Cone or Moisture Content Tests
Field users can override these default values in Field if they have the appropriate permission level
The table will load in the order that the system will look up a match from Field.

If you have set locations on the General tab of Project Specifications for this project, by default the list of locations will be filtered to only those chosen.

If you want to see the list of all locations, you need to remove this filter.

Field

Description

Location

Select one or many Locations to which these specifications should apply
If no Location is selected, system will assume all Locations not specified elsewhere in Project Specifications

Tip

title	Filter Location List for Project

Soil Classification

Select the classification to which this thse specifications should apply
If no Soil Classification is identified, system will assume all Soil Classifications not specified elsewhere

Tip
When adding specifications, multiple soil classifications can be selected at one time to assist with speed of data entry.

Moisture Specification

If box is left unchecked (Displays as YES in the table), Lower and Upper % Moisture Tolerance is entered in Field
If box is checked (Displays as NO in the table), Lower and Upper % Moisture Tolerance fields are hidden and all moisture results will be passing

Lower/Upper Moisture % Tolerance

Enter the lower / upper moisture tolerance values

Require Maximum Specified Compaction

Select this box if you would like Specified Maximum Compaction values entered
This box will default based on the current global setting in Administration

Minimum/Maximum Specified Compaction (%)

Enter the minimum / maximum specified compaction values
These values can be overridden in Field as necessary

Moisture Requires Retest

Select this box if you would like a Field user to perform a retest on Tests that fall outside the defined Moisture Tolerance.
If left unchecked, tests that fail on moisture will NOT be presented for a retest
Defaults to TRUE when adding a specification

Tip
The Delete Soil Specifications button above the grid can be used to delete multiple specification rows at one time The Location filter control above the grid allows you to filter the specification grid to a specific location The Soil Classification filter control above the grid allows you to filter the specification grid to a specific soil classification

Bituminous Density Test Specifications

Field	Description
Material	Identify the material to which the specifications apply The list of materials is determined by your MetaField Business Administrator This is a required field
Require Maximum Specified Compaction	Select this box if you would like Specified Maximum Compaction values entered This box will default based on the current global setting in Administration
Minimum Specified Compaction (%)	Enter the minimum specified compaction for the material selected Users can edit this value in Field If left blank, global specifications will be provided in Field If minimum specifications are provided, maximum specifications must also be entered
Maximum Specified Compaction (%)	Enter the maximum specified compaction for the material selected Users can edit this value in Field If left blank, global specifications will be provided in Field If maximum specifications are provided, minimum specifications must be also entered
Required Retest	Select this box if you would like a Field user to perform a retest on Tests that fall outside the specified compaction range If left unchecked, failing Bituminous Nuclear Gauge Tests will NOT be presented for retesting

Soil Density Project Specification Examples

Below are examples of how moisture and compaction settings will default in Field based on what is entered in Project Specifications and global settings in Admin.

Info

icon	false
title	Example Admin Settings

Minimum Specified Compaction	Maximum Specified Compaction
90	105

Lower Moisture Tolerance	Upper Moisture Tolerance
-1	3

Soil Classification Code	Lower Moisture Tolerance	Upper Moisture Tolerance	Moisture Failures Require Retest
SP	-2	2	No
SC	-3	3	No
SP-SM	-1	1	No

Tip

icon	false
title	Example 1 (Locations Only)

Project Specifications

Locations	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
Base Fill	No					95	100	No
Base Fill: Sidewalk	Yes	-2	3	93	100	No
Non-Structural Fill	Yes					97	100	Yes

Field Defaults

Locations	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
Base Fill	SP	No (PS)					95 (PS)	100 (PS)	No (PS)
Base Fill: Sidewalk	SP-SM	Yes (PS)	-2 (PS)	3 (PS)	93 (PS)	100 (PS)	No (PS)
Non-Structural Fill	SC	Yes (PS)	-3 (Admin)	3 (Admin)	97 (PS)	100 (PS)	Yes (PS)

Tip

icon	false
title	Example 2 (Soil Classifications Only)

Project Specifications

Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
	SP	No							No
	SP-SM	Yes	-2	2				No
CL	Yes				98	100	Yes

Field Defaults

Locations	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
Base Fill	SP	No (PS)				90 (Admin)	105 (Admin)	No (PS)
Base Fill: Sidewalk	SP-SM	Yes (PS)	-2 (PS)	2 (PS)	90 (Admin)	105 (Admin)	No (PS)
Non-Structural Fill	CL	Yes (PS)	-1 (Admin)	3 (Admin)	98 (PS)	100 (PS)	Yes (PS)

Tip

icon	false
title	Example 3 (No Location / Soil Classification Defined)

Project Specifications

Locations	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
				Yes	-2	2	97	100	No

Field Defaults

Locations	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
(Any)	(Any)	Yes (PS)	-2 (PS)	2 (PS)	97 (PS)	100 (PS)	No (PS)

Tip

icon	false
title	Example 4 (Location and Soil Classifications Defined)

Location	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
Base Fill	SP	Yes	-4	1	92	100	Yes
Base Fill			Yes				95	100	No
Sidewalk		Yes				95	102	No
	SP-SM	No								No
Structural Fill		Yes					98	100	No

Field Defaults

Location	Soil Classification	Has Moisture Specification	Lower Moisture Tolerance	Upper Moisture Tolerance	Minimum Specified Compaction	Maximum Specified Compaction	Moisture Failures Require Retest
Base Fill	SP	Yes (PS)	-4 (PS)	1 (PS)	92 (PS)	100 (PS)	Yes (PS)
Base Fill	SP-SM	Yes (PS)					95 (PS)	100 (PS)	No (PS)
Sidewalk	SC	Yes (PS)	-3 (Admin)	3 (Admin)	95 (PS)	102 (PS)	Yes (PS)
Structural Fill	CL	Yes (PS)	-1 (Admin)	3 (Admin)	98 (PS)	100 (PS)	No (PS)
Utility Trench	SP-SM	No (PS)				90 (Admin)	105 (Admin)	No (PS)

Versions Compared

Old Version 50

New Version Current

Key

Setting Density Project Specifications

Soil Density Test Specifications

Bituminous Density Test Specifications

Soil Density Project Specification Examples