Versions Compared

Old Version 6

changes.mady.by.user Christy Kolle

Saved on

compared with

New Version Current

changes.mady.by.user Karl Burkum

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...


Table of Contents
Table of Contents

...

Purpose

This section of QC allows you to review Density Tests as well as build and finalize reports.  When  When you first start using QC you will need to search for a project from the project search panel.  Recent projects you have worked with will display below for easy access. Select  Select View Tests to open the project and see the associated Tests.

Image Removed
Click on image to enlarge.

Image Added

Info
titleView Tests

Only projects with Density Tests will have a View Tests link.

...

Density

...

Test Filters

To limit the test results displayed, you may set various filters in the filter pane and select Filter.  These filter settings will be retained until you select Clear All or Logout.Image Removed
Click on image to enlarge. or navigate away from the page.  To save a commonly used filter set, apply filters accordingly and select Save Filter.

Image Added

Edit Density Test Results

To edit a Density Test, select the pencil icon next to the test.  This will open the test for editing.  Depending on your permissions you will be able to edit various fields.

Tip
titleReviewing All Density Test Fields

Not all fields are available for viewing from the Test Review table. Opening the test for editing will allow you to review all test data.

Image Removed

Click on image to enlarge.


 Only
Info
Info
titleBatch Edit

Multiple test can be edited at once by checking the box then clicking the Batch Edit button.


Image Added


Info

Only users assigned to a security role

(General - Roles)

with the

DensityTestAdministration

Manage Density Field Test Data permission are allowed to make changes in the Test Data section.

See

Only users assigned to a security role with the Manage Density Test Date permission are allowed to make changes to the Test Date field. See your MetaField administrator regarding assignment of this permission should your business workflow require this.

Tip

The Retest Not Required check box can be used to indicate that a test does NOT require a retest in the event the business rules determined a retest should be performed.

Image Added

Certain Density tests may allow for image plotting on the uploaded proctor curves file.  Please note that only image file types may be plotted on.  PDF file types can not be manipulated.Image Plotting

Image Added

Field Notes

If a technician has added Field Notes to a Test, an icon will display on the Test Review table.  

Image Removed
Click on image to enlarge.


Image Added


To view the note, open the test for editing and scroll to the bottom.

Image Removed
Click on image to enlarge.

Image Added

Related Tests

Related Tests can be added / removed in the QC Edit / Review Screen. If a test is related to another record, this relationship will be indicated on the QC grid. Related tests are only available for Soil Nuclear Gauge, Sand Code and Moisture Content tests.

Image Added

Image Added

Select the arrow icon to display the related tests.

Image Added

Report Comments

You can add comments to a single density test.  These comments will display on the client report. To add Report Comments, open the test for editing and scroll to the bottom.

Image Removed
Click on image to enlarge.

Image Added

Changing Test Status

To update a test status, check the box next to one or more tests and select Set Status Change Status.

Image Removed

Click image to enlarge.

Image Added

Tip
titleChanging Status of Multiple Tests

Select the top checkbox to select all tests in the current view at one time.

Test Status Definitions

 

Info
titleComplete Status and ReportsImportant

Only Tests tests in the status of Complete may be added to a reportor Pending can be reported.


StatusDefinition

Analyzed

  • This status is automatically assigned by MetaField after all required test data has been entered and calculations can be performed.
  • This status may also be manually set by a user in QC (except were the Test status is Pending and test calculations have not been performed).

Pending

  • MetaField will automatically assign this status if all required fields are entered but test results cannot be calculated.
  • You may also manually assign this status in QC.
  • Tests with a status of Pending can be included on a report.

Complete

  • A user assigns this status after completing Quality Control review.
Only tests
  • Tests with a status of Complete can be included on a report.

Review

  • Review is an optional status that is defined by your company’s business process.
  • This status is manually set by a user. 


Tip
titleExamples of Using the Review Status

Review can be used if the test review has been started, but may take more time to complete. The  The project manager can assign the status as a reminder that he is waiting for information about this test.

Creating a Density Report

Warning
titleReports - Test Status = Complete

Only tests with the status of Complete may be added to a Sand Cone, Soil Nuclear Gauge, Oven Burn Moisture Content, or Bituminous Nuclear Gauge Report.


StepDescriptionExample
1.Go to Quality Control and select Density Testing.
Image Removed
Click image to enlarge.

Image Added

2.Select the desired project. If you have previously been working in MetaField, the last project selected will display. To view another project, click Change Project.
Image Removed
Click image to enlarge.


Image Added

3.Verify that the test status of those you want to include on your report are set to Complete.
 
Image Added
4.

Check the box next to desired tests.

Tip
titleExpand table

Use the bottom table controls to expose more tests on the page. You can only add tests from a single page.

Image Removed

Click image to enlarge.

Image Removed
Click image to enlarge.

Image Added



Image Added
5.(Optional) You can view your report by clicking Preview Report.
Image Removed
Click image to enlarge.

Image Added
6.

There are two options when adding tests to a report:

6.A.
  • Select Draft Report button. This will create a report and send this report to the Draft Review portion of Quality Control.

  • In order for the report to be sent to Delivery, the report will need to be Finalized from Draft Reports.
6.B. 7.

Depending on which button is selected and how your Business Administrator has configured your reports, you may see some of the options below.

FieldDescription
Report Note
  • Enter a note that will display on the final report
  • Maximum number of characters is 25
Alternate Title
  • This field will only display if the report has been configured by your Business Administrator to allow Alternate Titles
  • If allowed, this is an optional field
Report Label
  • Select a Report Label from the dropdown
  • Report Labels are controlled by your Buisness Administrator
  • This is required field
Digital Signature
  • This option will only appear if your Administrator has permitted this type of report to be digitally signed
  • This option will not appear when creating a Draft Report
Image Removed
Click image to enlarge.
  • Select Finalize Report button. This will create a report and send this report to Delivery.
Image Removed
Click image to enlarge.
Info

See QC - Finalize Reports (All Areas) for details on the report finalization process.



Image Added


Info
titleOptimum Moisture

Upon creating a density report, the option to include / exclude the Optimum Moisture Tolerance column on the report will be presented.

Image Added

Image Added


View Legend

To view all of the Test Remark Codes and applicable Test Modes used in MetaField select the View Legend button.  These codes and descriptions will also display on Density Testing reports.
Image Removed
Click to enlarge image.

...

Image Added