Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Table of Contents

About

The Settings tab has a number of sub-tabs.  The various sub-tabs are used to define values that are selected by users in various pick lists in MetaField.

Click image to enlarge.

Sample Types

The Sample Types grid lists the various sample types available for concrete work.

FieldDescription
Name
  • Name of the sample type.
  • These are system names and not editable.
Code
  • Short name to identify the sample type.
  • Editable by administrators.
Default Specimen Size
  • Captures the default specimen size (used most) for that sample type.
  • Default specimen sizes can't be defined for sample types that are not physical samples (Field Test, Truck Log)

Certain sample types listed (Field Test, Truck Log) do not pertain to the capture of physical samples. MetaField simply considers them a classification of concrete work.

Specimen Sizes

The Specimen Sizes tab is used to store all of the specimen sizes used in your practice.

FieldDescription
Name
  • Name of the specimen size.
Diameter / Width
  • Diameter of the cylinder / width of the beam.
Height / Length
  • Height of the cylinder / length of the beam.
Depth
  • Depth of the beam.
Used for Beam
  • Indicates if the specimen size is applicable for beams.
  • Only specimen sizes with a check mark will be presented when entering a beam sample type.
Used for Cast Cylinders
  • Indicates if the specimen size is applicable for cast cylinders.
  • Only specimen sizes with a check mark will be presented when entering a cast cylinder sample type.
Used for Density Test
  • Indicates if the specimen size is applicable for concrete density tests.
  • Only specimen sizes with a check mark will be presented when entering a cast cylinder sample type.

Click image to enlarge.

Admixture Unit

The Admixture Unit tab is used to store all of the admixture units used in your practice.

FieldDescription
Value
  • Admixture unit value (i.e. Gal, Gr, Lb, etc.)

Click image to enlarge.

Admixture Type

 

 

Method of Placement

 

 

Sampled From

 

 

Specified Air

 

 

Specified Slump

 

 

Beam Fabrication Method

  • No labels