Tips |
---|
Form Design
Sample Form Settings
Sample forms used for asphalt lot reporting need to have a few settings applied to them. Application of the Asphalt Lots form setting will automatically add the core fields to the sample form design that are necessary for the asphalt lot reporting to work.
Form Setting | Notes |
---|---|
Sample Material |
|
Asphalt Lots |
|
Field Mappings - Sample Report Section
Fields reported in the Sample section of the Asphalt Lot report need to be mapped to the form fields. This is accomplished by applying the Asphalt Lot Report setting to a field on the sample form and selecting (mapping) the form field to the report field applicable to the Sample section of this report.
- Form Design - Test Forms
Sample forms used for asphalt lot reporting need to have a few settings applied to them. Application of these settings will enable fields from that test form to appear in the appropriate section on the Asphalt Lot Report.
Test Form Settings - Sieve Report Section
text here
Form Setting | Notes |
---|---|
Test Material |
|
Asphalt Lot Test - Sieves |
|
Material Specification |
|
Field Mappings - Sieve Report Section
Field mappings are not required for the Sieve section of the Asphalt Lot report. Because the target fields are predicable and sourced from the material specification selected on the form form record, the system is able to source the appropriate data dynamically from the form design.
Sourced Data | Notes |
---|---|
Sieve Size Columns |
|
Percent Passing |
|
Test Form Settings - Mix Analysis Report Section
Field Mappings - Sieve Report Section
Test Form Settings - Gyrations Report Section
Field Mappings - Sieve Report Section
Lot Aggregations - Sources of Data
Data appearing under the grids containing data for the multiple tests belonging to a lot is sourced from a variety of areas.
Data | Notes | |
---|---|---|
Average |
| |
Formulation |
| |
Measured Deviation |
| |
Allowable Deviation |
| |
Critical Deviation |
| |
Minimum Requirement |
| |
Maximum Requirement |
|
Report Design
The Asphalt Lot Sample Report is the report that aggregates the defined sample and test fields together on a single report for a given asphalt lot number within a given project. This report is a hard coded report that is not based on a custom report design within Report Designer. Administrators can control the report settings of the report, but they can't control the look of the overall report design.