Application Area | Change / Deployment Note | Value | Video / Screen Shot Click To Enlarge |
|---|---|---|---|
Administration - Concrete/Grout/Mortar | Added “Sampling Method” and “Sample Condition” to General Settings Add your Sampling Method and Sample Condition values so they can be included on C/G/M samples and meet standards | These repositories can be used to store the values for these respective lists so these data points can be included on your C/G/M samples and meet standards requirements |  |
Administration - Offices and Labs | Added the country field to office and lab addresses Add the Country value to these entities as desired | Providing ability to specify the country of a lab or office |   |
Field - Manage Samples | Added the “Uncollected” status and will only appear if there are Uncollected specimens | Allows for filtering on the Uncollected specimen status and provides the opportunity to Pick Up or Check In specimens that were incorrectly designated as Uncollected specimens | |
Field - Specimen Check In | Only active labs will display for selection | List of labs will be shorter and only active labs can be selected from |  |
Form Designer | Data Source Added - Bituminous Material | The Bituminous Material values can be mapped to a pick list and available for selection on a form |  |
Form Designer | Data Source Added - Bituminous Lab Results | The Bituminous Lab Results values can be mapped to a pick list and are available for selection on a form | |
Form Designer | Data Source Added - Standards: Soil Moisture | The Soil Moisture Standards can be mapped to a pick list and are available for selection on a form | None |
Form Designer | Added a new LOOKUP source for Bituminous Lab Results that can pull back the following fields:
| These additional metadata fields can be returned to a form after selecting a Bituminous Lab Results value | None |
Form Designer | Added a “Display as Checkbox” setting for the Yes/No Field Type Reconfigure / update any form designs where having a Y/N check box versus a slider would be beneficial | Form designers have more control over the UI to display Y/N fields as a simple check box versus Yes / No slider | |
Form Designer | Density Test - Bituminous Nuclear Gauge has been added as a Form Setting for DIY Activity Forms - this can only be added once the user has selected the appropriate UoM has been applied | Form designers can build a form that contains the necessary system fields and settings for a bituminous nuclear gauge test | |
Form Designer | CGM Sample Specification Forms - Added a “Draft Value” option on Supplier / Plant / Mix Design fields when the respective datasources are applied to these fields | Users can now add a new draft value to these DIY Sample forms |  Same applies to Plant and Mix Design data sources |
Form Designer | Various Lookup Source Changes #Proctors Lookup Source - Added additional fields that can be returned as lookup fields for a proctor record
#Gauges Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge record
#GaugesStandardization Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge - standardized record
| These additional metadata fields can be returned to a form after selecting a Proctor value | |
Form Designer | Added the ability to use calculations on Y/N field types | Allows for conditional logic to be used to set a Y/N field to either of the values |  |
Form Designer | If a Sample form contains the Form Setting: CGM Sample Specification, and a user were to select the following Sample Types: Batch Log, Density Test, Grout Batch Log, or Grout Field Test, the “Specimens” section will no longer appear on the form. | Specimens aren’t collected with the sample types Batch Log, Density Test, Grout Batch Log, and Grout Field Test, therefore there is no need for this section in the Sample form | |
Form Designer | Issue resolved that prevented sieve size labels from adjusting when a form’s chart axis scale was adjusted | Sieve size labels will appear in the correct position on the X axis |  |
Form Designer | Test Forms - Test Age calculated column added to all Test form designs - shows the planned test age until tested and then shows the actual test age | Allows for Test Age to be included on reports, form-specific data grids and batch entry data grids |  |
Integration - ProjectData API | TimeZone field has been added to the project data API’s Project endpoint | The new time zone field will allow integrations to update the project time zone in project specification | None |
Integration - ProjectData API | Country field has been added to the project data API’s Project and Client endpoint | The new Country field will allow integrations to specify the country value in the address of a project or client | None |
LIMS - Bituminous Results | Updated the grid in Bituminous Results to append the unit of measure to the field value | Conserves grid space by allowing for one column to be used for varying units of measure |  |
LIMS - Bituminous Results | Updated the fields in Bituminous Results under the “Add Bituminous Density” button to include a unit of measure - the unit of measure that is selected will be defaulted based on the project default (if defined), and then the global default if not defined on the project level | Allows for both imperial and metric Max Density values to be stored based on the screen’s defined unit of measure |  |
LIMS - Other Materials Work Queue | Issue resolved where using the Enter key on an open form being edited ended up displaying related test forms instead of saving the form record | Allows for the form being edited to save when the Enter key is used - as intended | None |
LIMS - Other Materials Work Queue | The DIY test sheet introduced in 2021.5 now supports a column which displays prior test results for a given sample | DIY test sheets now have full parity with discrete bench sheets. | |
Project Administration - Projects and Clients | Added Country field to the address definition of Project and Clients | Provides specification of country in which the project or customer resides. |   |
Quality Control - Concrete/Grout/Mortar | Added Sampling Method and Sample Condition to C/G/M forms and the Compressive Strength report | This additional field is for ASTM standards | |
Quality Control - Sampling | Batch test reporting functionality added to generate multiple test reports based on the selected samples | Multiple (like) test reports can be generated efficiently for selected sample records |  |
Report Designer | “Test List Report” property added to designate if the report design is used to generate a customized test list | Shows only Test List reports when generating a Test List and omits these types of reports when generating other report types |  |
Report Designer | Issue resolved that caused data grids and images to be removed from a report preview if the Allow Distinct Headers / Footers report setting was set to Yes | Reports with this setting will render data grid and images as expected |  |
Scheduling - Pending Field Action | If Activity Form Setting Density Test (Soil Nuclear Gauge or Bituminous Nuclear Gauge) is marked YES for Retest, the test will be inserted into Scheduling / Pending Field Actions | Provides a means for a failed SNG density test (requiring a retest) using a DIY form to be queued as a Pending Field Action in the Scheduling system |  |
Scheduling - Work Item | New Work Item called Retest - Bituminous Density has been added | Allows for failing bituminous density tests to be queued / scheduled using a distinct work item |  |
Copyright © 2022. Agile Frameworks, LLC. All Rights Reserved. Proprietary and Confidential.