QC - Concrete / Grout / Mortar

Table of Contents

Purpose

The Concrete / Grout / Mortar QC section allows you to review Concrete / Grout / Mortar samples and their specimens along with preparing reports.

Selecting Projects

You will need to search for a project from the project search panel. Recent projects you have worked with will display below for easy access. Select View Samples to open the project and see the associated samples.

Main Screen

Tabs

Tab	Purpose
Concrete	Contains all Concrete samples (cast cylinders, beams, batch logs, field tests, etc.)
Grout / Mortar	Contains all Grout / Mortar samples

Functionality between the two tabs is fairly identical. There will be differences in data displayed, etc. based on the sample types.

Sections

Section

Purpose

Filter Pane

Various filters can be applied to find sample / specimens matching the defined filter criteria

Sample Grid

Contains the sample records

Buttons

Button	Purpose
Preview Placement Summary Report	Generates a preview of the Placement Summary report Concrete tab only
Create Placement Summary Draft Report	Creates a Draft Placement Summary report Puts the report in the the Draft Reports quality control module for review Concrete tab only
Finalize Placement Summary Report	Finalizes the Placement Summary report and moves it to the Delivery module Concrete tab only
Batch Complete	Changes the Analyzed status on all selected sample records to Complete status
Create Batch Specimen Report	Creates specimen / lab results reports in batch for all selected sample records

Specimen Grid

Specimens for the selected sample in the sample grid above
Not all sample records will have specimens (i.e. Batch Log, Field Test).

Button Bar Buttons

Button	Purpose
Change Status	Changes the status on marked specimens (i.e set a specimen as Review status or change from Analyzed to Complete)
Preview Specimen Report	Generates a preview of the respective specimen / lab results report (based on the sample type)
Create Specimen Draft Report	Creates a Draft specimen / lab results report Puts the report in the Draft Reports quality control module for review
Finalize Specimen Report	Finalizes the specimen / lab results report and moves it to the Delivery module
View Break Remarks	Displays a legend of all break remarks and their descriptions
Set Remark Code	Sets a remark code on the selected specimens Specimen needs to have lab data or is designated as untested
View Fracture Types	Displays a legend of all fracture type codes and their descriptions

Specimen Record Buttons

Button

Purpose

Edit

Add a Report Comment for a particular specimen
Add / remove the Hold designation on a specimen
Manage the Test Cost for a specimen
Exclude a specimen from test age average calculations.

Edit Pick Up

Modify specimen pick up metadata (temperatures, date, time, who, standard / field cure information, etc.)

Edit Check In

Modify specimen check in metadata (check in date, time, who, etc.)

Low breaks will highlight the compressive strength and % of specified strength values in red. Low breaks alert levels are configured in the Administration and Specifications module.

Specimen Statuses

Automatically Assigned

Status	Definition
Draft	Sample has been saved, but has incomplete data
Logged	Specimen is ready to be Picked Up and/or Checked In
Picked Up	Specimen has been “Picked Up” and not yet checked into the lab Pick Up process is optional in the Field module
Checked In	Specimen has been "Checked In" to the lab for testing
Lab-Review	Specimens being reviewed for quality by the lab
Analyzed	Testing is complete and test results are available for review by project managers
Missing Data	Sample record with a Draft supplier / plant / mix design

Manually Assigned

Status	Definition
Review	Optional status that can be applied to any specimen that requires further review before reporting
Complete	Applied when test data review is complete and the specimen is ready for reporting
Uncollected	Specimens were never Picked Up or Checked In from the field If a specimen is incorrectly marked as Uncollected in Field, a Quality Control user can set the status back to Logged. Likewise you can mark a specimen as Uncollected if this was not done in the field module.

A specimen cannot be reported on a lab / specimen report until it's status is set to Complete. Draft samples can't be added to any report.

Review Status

The use of the "Review" status can be determined by each business using MetaField.
A common use of the "Review" status is used to indicate that the QC user has started to review the Specimen, but is not yet ready for reporting.

Common Controls

Control	Purpose
	Opens the sample record so it can be edited (sample grid) Allows for report comments related to a specimen to be added (specimen grid) Allows for a specimen to be excluded from the test age average calculation (specimen grid) Specimen Grid Edits If the Test Age and/or Hold indicator for a Specimen need to be edited, they must be edited prior to the Specimen being "Checked In" If the change needs to be made after this point, the lab must be notified directly Lab results can't be modified in the QC module - they must be changed in the Lab module Editing Date Cast Date The Cast / Logged Date for a sample may be edited until one more specimens has been checked-in to Lab. Once a specimen has been checked-in, this date cannot be changed unless you have the elevated Manage Concrete Sample Date permission that grants you access to change the date.
	Indicates there are Field Notes that are part of the sample record Field Notes are not reportable and visible (at the bottom) if you edit the sample record
	Indicates if the sample is related to another sample Typically used if you are casting more than one type of sample type from a given sample of concrete (i.e. casting some cylinders and creating a beam)
	Shows the reports that a sample / specimen has been reported on
	Allows for pickup information (curing metadata) to be modified
	Allows for check in data to be modified

Creating Reports

Placement Summary Report

Select the samples you want to report
Choose if you want to the load volumes to be cumulated on the report
Supply the remaining report metadata (see table below)

Specimen (Lab Results) Report

Select the sample you want to report
Select the specimens you want to report for the selected sample
Choose if you want to include the curing information (min/max temperatures, initial curing environment, final curing environment, moisture protection, etc.) on the report
Supply the remaining report metadata (see table below)

Only lab results for specimens marked as Complete will display on lab reports.

Report Metadata

Field	Description
Starting Report Number	Only displays if report numbering is turned on for your organization and this is the first report created for this project Allows you to set the first number for this report type. If no value is added, system will start with 1. Enter a whole number from 1-999,999
Report Note	Enter a small note that will display in the upper-right corner of the report (i.e. "Revision", "Correction", etc.) Maximum number of characters is 25
Alternate Title	An alternate report title that can be defined a the time the report is created Will only display if the report has been configured by your MetaField Business Administrator to allow alternate titles
Report Label	Select an optional Report Label from the pick list Report Labels are controlled by your MetaField Business Administrator
Description	Will default to the Set and Sample number for specimen-based reports Can be modified if needed Becomes part of the saved or published (AgilePort) file name if configured by your MetaField Business Administrator
Digital Signature	Allows for a report to be digitally signed if licensed (AgileStamp) and configured by your MetaField Business Administrator

Creating Batch Specimen Reports

There are times where it is helpful to create specimen reports for multiple sets at the same time. You can do this using the Create Batch Specimen Report button above the Sample Grid. Simply mark the sets you want to report and click the Create Batch Specimen Report button. A preview window will be presented that allows project managers to review and select if each report should be deleted (not approved), saved as a Draft report (Draft Reports QC workflow) or Finalized. Report metadata only needs to be supplied once and is common for ALL reports processed as part of the Batch Specimen Report workflow.

When using this functionality, you are required to select like sample types (i.e. all marked records are cast cylinder records). You are NOT allowed to create a batch report with a mix of beams and cast cylinder records, for example.