Table of Contents |
---|
About
The Record Administration tab allows you to Delete and Move Density Tests, Concrete Samples, and Reports.
Click image to enlarge.
Deleting / Moving
Step | Description | Example |
---|---|---|
1. |
| Click image to enlarge. |
2. |
| Click image to enlarge. |
3 |
| Click image to enlarge. Click image to enlarge. |
Renumbering Concrete Sets
- Under the Concrete Samples tab, there is an option to renumber sets.
- When doing so, renumbering a concrete sample set will renumber all sets after the selected one.
- You will be given the option to enter the new set number for the selected set.
- Example: Sets 1 and 2 were saved without supplying a starting set number (by mistake), but were supposed to be sets 37 and 38 instead. The Sample Management utility can be used to renumber set 1 to be set 37. Subsequently, set 2 will be renumbered to be set 38.
- Example: Sets 1 and 2 were saved without supplying a starting set number (by mistake), but were supposed to be sets 37 and 38 instead. The Sample Management utility can be used to renumber set 1 to be set 37. Subsequently, set 2 will be renumbered to be set 38.
- This behavior of renumbering will also occur if you choose to Delete or Move and Concrete Samples.
- We HIGHLY recommend notifying the lab of any renumbering changes.
Click image to enlarge.