Sample Section
After you have selected a project Sample Type (Add Sample button) you will be taken to the main Sample screen.
Image Removed
| Field | Description |
|---|
| Sample Type | - Visual reference to the sample type selected
|
| Technician | - Select the person who is performing the work
- Defaults to the current user
- This is a required field
|
| Date Logged / Cast | - Record the date by typing in a value or selecting from the calendar
- This is a required field
|
| Placement Location | - Select corresponding location from the drop-down
- List is controlled by your MetaField Business Administrator
- This is a required field
|
| Location Details | - Type in additional location information
- 500 character limit.
- This is a required field
|
| Longitude | - Longitude (in degrees) where the activity is happening
| Info |
|---|
Up to 8 decimal places are allowed in the longitude value. |
|
| Latitude | - Latitude (in degrees) where the activity is happening
| Info |
|---|
Up to 8 decimal places are allowed in the latitude value. |
|
| Project Location ID | - Client defined field to identify granular site locations based on business process.
- This information displays in QC only, not on reports.
|
| Alternate Sample / Set # | - Used to store an alternate / cross-reference sample and set number
- Optional and not used very often
|
Specifications Section
| Info |
|---|
Click the Specifications button at the bottom of the Sample screen to open the Specifications section. |
Purpose
The Specifications section stores the specifications related to a sample. Specifications defined in Project Specifications will default on this screen. Otherwise, this section can be used to enter specifications in the field.
Specifications Section
| Field | Description |
|---|
Specified Strength Modulus of Rupture | - Enter the Specified Strength for the sample
|
Defaults if defined in Project Specifications- Modulus of Rupture only applies to Beam sample types
|
| Specified Strength Test Age | - Enter the test age for the Specified Strength (i.e. 28 days)
|
Defaults if defined in Project Specifications |
Min/Max Wet Unit Weight
Min/Max Dry Unit Weight | - Enter unit weight specifications
- Displays for Density Test sample types
|
Defaults if defined in Project Specifications |
| Lower / Upper Specified Air Limit | - Air Content low / high limit specifications
|
Defaults if defined in Project Specifications |
| Lower / Upper Specified Slump | - Slump low / high limit specifications
|
Defaults if defined in Project Specifications| Lower / Upper Specified Spread | - Spread low / high specifications
|
Defaults if defined in Project Specifications |
| Lower / Upper Flow Cone Limit | - Flow Cone low / high specifications
|
Defaults if defined in Project Specifications |
| Lower / Upper Cone Penetration Limit | - Cone Penetration low / high specifications
|
Defaults if defined in Project Specifications
| Info |
|---|
The following screen shot only displays some of the specification fields. The fields presented will vary based on the selected sample type. |
Image Added