Table of Contents |
---|
About
- There may be circumstances where concrete samples are either untested or uncollected.
- Untested or Uncollected specimen will need to be identified in either QC and/or Lab.
- Listed below, are different routes untested or uncollected specimen can go without interfering with other projects or results.
Marking Specimen as Uncollected in Field
Step | Description | Example |
---|---|---|
1. |
| |
2. |
| |
3. | Specimens marked as uncollected, will not appear in Lab. These specimen will only appear in QC, with a status of Uncollected. | No test results available for uncollected specimen. |
Marking Specimen as Untested in Lab
Notice
In cases where uncollected specimen are accidentally marked as Picked Up, the following method will complete the specimen with no test results.
Step | Description | Example |
---|---|---|
1. |
| |
2. | The next steps are performed in the Lab module.
| Click image to enlarge. |
3. | Locate the specimen in the Testable queue and use the Modify Test Date control to change the date to current to move it to theTo Testqueue. |