You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 4
Next »
Sample Section
After you have selected a project Sample Type (Add Sample button) you will be taken to the main Sample screen.
Field | Description |
---|
Sample Type | - Visual reference to the sample type selected
|
Technician | - Select the person who is performing the work
- Defaults to the current user
- This is a required field
|
Date Logged / Cast | - Record the date by typing in a value or selecting from the calendar
- This is a required field
|
Placement Location | - Select corresponding location from the drop-down
- List is controlled by your MetaField Business Administrator
- This is a required field
|
Location Details | - Type in additional location information
- 500 character limit.
- This is a required field
|
Longitude | - Longitude (in degrees) where the activity is happening
|
Latitude | - Latitude (in degrees) where the activity is happening
|
Project Location ID | - Client defined field to identify granular site locations based on business process.
- This information displays in QC only, not on reports.
|
Alternate Sample / Set # | - Used to store an alternate / cross-reference sample and set number
- Optional and not used very often
|
Specifications Section
Field | Description |
---|
Specified Strength Modulus of Rupture | - Enter the Specified Strength for the sample
- Defaults if defined in Project Specifications
- Modulus of Rupture only applies to Beam sample types
|
Specified Strength Test Age | - Enter the test age for the Specified Strength (i.e. 28 days)
- Defaults if defined in Project Specifications
|
Min/Max Wet Unit Weight Min/Max Dry Unit Weight | - Enter unit weight specifications
- Displays for Density Test sample types
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Air Limit | - Air Content low / high limit specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Slump | - Slump low / high limit specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Specified Spread | - Spread low / high specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Flow Cone Limit | - Flow Cone low / high specifications
- Defaults if defined in Project Specifications
|
Lower / Upper Cone Penetration Limit | - Cone Penetration low / high specifications
- Defaults if defined in Project Specifications
|