Untested / Uncollected Samples

Table of Contents

About

There may be circumstances where concrete samples are either untested or uncollected.
Untested or Uncollected specimen will need to be identified in either QC and/or Lab.
Listed below, are different routes untested or uncollected specimen can go without interfering with other projects or results.

Marking Specimen as Uncollected in Field

Step	Description	Example
1.	Users have the option to mark a specimen as uncollected when performing a pick-up. Select the appropriate sample, and then select the pick-up button.
2.	Once at the pick-up screen, change the status of the specimen from Picked Up to Uncollected. Next, select which specimen in the set, should be marked as uncollected. Select Save
3.	Specimens marked as uncollected, will not appear in Lab. These specimen will only appear in QC, with a status of Uncollected.	No test results available for uncollected specimen.

Marking Specimen as Untested in Lab

Notice

In cases where uncollected specimen are accidentally marked as Picked Up, the following method will complete the specimen with no test results.

Step	Description	Example
1.	If the a specimen has been marked as picked up, select the Check In button. This will open the Check In menu to move the specimen to the Lab module in the To Receive queue.
2.	The next steps are performed in the Lab module. Receive the specimen. This will move it to the Testable queue.
3.	Locate the specimen in the Testable queue and use the Modify Test Date control to change the date to current to move it to the To Test queue.
4.	Locate the specimen in the To Test queue and select the Enter Test Results button. Once the Enter Test Results panel has opened, mark the specimen as Untested. Select Save.
5.	Locate the specimen in the To Review queue and approve it. This marks the specimen as Complete in QC with no test results.
6.	The following example is what appears in QC if the above steps are complete. No test results would show for the indicated specimen.