Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Table of Contents

Purpose

The Specifications section stores the specifications related to a sample. Specifications defined in Project Specifications will default on this screen. Otherwise, this section can be used to enter specifications in the field.

Specifications Section

FieldDescription

Specified Strength

Modulus of Rupture

  • Enter the Specified Strength for the sample
  • Modulus of Rupture only applies to Beam sample types
Specified Strength Test Age
  • Enter the test age for the Specified Strength (i.e. 28 days)

Min/Max Wet Unit Weight
Min/Max Dry Unit Weight 
  • Enter unit weight specifications
  • Displays for Density Test sample types
Lower / Upper Specified Air Limit
  • Air Content low / high limit specifications
Lower / Upper Specified Slump
  • Slump low / high limit specifications
Lower / Upper Specified Spread
  • Spread low / high specifications
Lower / Upper Flow Cone Limit
  • Flow Cone low / high specifications
Lower / Upper Cone Penetration Limit
  • Cone Penetration low / high specifications

The following screen shot only displays some of the specification fields. The fields presented will vary based on the selected sample type.

 

  • No labels