2022.1 - Release Notes

Application Area

Change / Deployment Note

Value

Video / Screen Shot

Click To Enlarge

Application Area

Change / Deployment Note

Value

Video / Screen Shot

Click To Enlarge

Administration - Concrete/Grout/Mortar

Added “Sampling Method” and “Sample Condition” to General Settings

Add your Sampling Method and Sample Condition values so they can be included on C/G/M samples and meet standards

These repositories can be used to store the values for these respective lists so these data points can be included on your C/G/M samples and meet standards requirements

 

Administration - Offices and Labs

Added the country field to office and lab addresses

Add the Country value to these entities as desired

Providing ability to specify the country of a lab or office

 

Field - Manage Samples

Added the “Uncollected” status and will only appear if there are Uncollected specimens

Allows for filtering on the Uncollected specimen status and provides the opportunity to Pick Up or Check In specimens that were incorrectly designated as Uncollected specimens

 

Field - Specimen Check In

Only active labs will display for selection

List of labs will be shorter and only active labs can be selected from

 

Form Designer

Data Source Added - Bituminous Material

The Bituminous Material values can be mapped to a pick list and available for selection on a form

 

Form Designer

Data Source Added - Bituminous Lab Results

The Bituminous Lab Results values can be mapped to a pick list and are available for selection on a form

Form Designer

Data Source Added - Standards: Soil Moisture

The Soil Moisture Standards can be mapped to a pick list and are available for selection on a form

None

Form Designer

Added a new LOOKUP source for Bituminous Lab Results that can pull back the following fields:

  • Sample Description

  • Max Density

  • Test Method

These additional metadata fields can be returned to a form after selecting a Bituminous Lab Results value

 

Form Designer

Added a “Display as Checkbox” setting for the Yes/No Field Type

Reconfigure / update any form designs where having a Y/N check box versus a slider would be beneficial

Form designers have more control over the UI to display Y/N fields as a simple check box versus Yes / No slider

 

Form Designer

Density Test - Bituminous Nuclear Gauge has been added as a Form Setting for DIY Activity Forms - this can only be added once the user has selected the appropriate UoM has been applied

Form designers can build a form that contains the necessary system fields and settings for a bituminous nuclear gauge test

 

Form Designer

CGM Sample Specification Forms - Added a “Draft Value” option on Supplier / Plant / Mix Design fields when the respective datasources are applied to these fields

Users can now add a new draft value to these DIY Sample forms

Form Designer

Various Lookup Source Changes

#Proctors Lookup Source - Added additional fields that can be returned as lookup fields for a proctor record

  • Absorption Percent

  • Specific Gravity

#Gauges Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge record

  • Serial Number

  • Rx Density Limit 1

  • Rx Density Limit 2

  • Rx Moisture Limit

  • Require Density / Moisture Counts

  • Enter Moisture % On Test

  • Is Dry Density Input Preferred

#GaugesStandardization Lookup Source - Added additional fields that can be returned as lookup fields for a nuclear gauge - standardized record

  • Standard Count Date

  • Density Count

  • Moisture Count

  • Average Density (calculates the Average of the last 4 Density Counts)

These additional metadata fields can be returned to a form after selecting a Proctor value

 

Form Designer

Added the ability to use calculations on Y/N field types

Allows for conditional logic to be used to set a Y/N field to either of the values

 

Form Designer

If a Sample form contains the Form Setting: CGM Sample Specification, and a user were to select the following Sample Types: Batch Log, Density Test, Grout Batch Log, or Grout Field Test, the “Specimens” section will no longer appear on the form.

Specimens aren’t collected with the sample types Batch Log, Density Test, Grout Batch Log, and Grout Field Test, therefore there is no need for this section in the Sample form

 

Form Designer

Issue resolved that prevented sieve size labels from adjusting when a form’s chart axis scale was adjusted

Sieve size labels will appear in the correct position on the X axis

 

Form Designer

Test Forms - Test Age calculated column added to all Test form designs - shows the planned test age until tested and then shows the actual test age

Allows for Test Age to be included on reports, form-specific data grids and batch entry data grids

 

Integration - ProjectData API

TimeZone field has been added to the project data API’s Project endpoint

The new time zone field will allow integrations to update the project time zone in project specification

None

Integration - ProjectData API

Country field has been added to the project data API’s Project and Client endpoint

The new Country field will allow integrations to specify the country value in the address of a project or client

None

LIMS - Bituminous Results

Updated the grid in Bituminous Results to append the unit of measure to the field value

Conserves grid space by allowing for one column to be used for varying units of measure

 

LIMS - Bituminous Results

Updated the fields in Bituminous Results under the “Add Bituminous Density” button to include a unit of measure - the unit of measure that is selected will be defaulted based on the project default (if defined), and then the global default if not defined on the project level

Allows for both imperial and metric Max Density values to be stored based on the screen’s defined unit of measure

 

LIMS - Other Materials Work Queue

Issue resolved where using the Enter key on an open form being edited ended up displaying related test forms instead of saving the form record

Allows for the form being edited to save when the Enter key is used - as intended

None

LIMS - Other Materials Work Queue

The DIY test sheet introduced in 2021.5 now supports a column which displays prior test results for a given sample

DIY test sheets now have full parity with discrete bench sheets.

 

Project Administration - Projects and Clients

Added Country field to the address definition of Project and Clients

Provides specification of country in which the project or customer resides.

 

Quality Control - Concrete/Grout/Mortar

Added Sampling Method and Sample Condition to C/G/M forms and the Compressive Strength report

This additional field is for ASTM standards

 

Quality Control - Sampling

Batch test reporting functionality added to generate multiple test reports based on the selected samples

Multiple (like) test reports can be generated efficiently for selected sample records

 

Report Designer

“Test List Report” property added to designate if the report design is used to generate a customized test list

Shows only Test List reports when generating a Test List and omits these types of reports when generating other report types

 

Report Designer

Issue resolved that caused data grids and images to be removed from a report preview if the Allow Distinct Headers / Footers report setting was set to Yes

Reports with this setting will render data grid and images as expected

 

Scheduling - Pending Field Action

If Activity Form Setting Density Test (Soil Nuclear Gauge or Bituminous Nuclear Gauge) is marked YES for Retest, the test will be inserted into Scheduling / Pending Field Actions

Provides a means for a failed SNG density test (requiring a retest) using a DIY form to be queued as a Pending Field Action in the Scheduling system

 

Scheduling - Work Item

New Work Item called Retest - Bituminous Density has been added

Allows for failing bituminous density tests to be queued / scheduled using a distinct work item

 

Application Area

Change / Deployment Note

Value

Video / Screen Shot

Click To Enlarge

Application Area

Change / Deployment Note

Value

Video / Screen Shot

Click To Enlarge

Patch 2022.1.1

Reports

Issue resolved where reports displayed HTML formatting tags when formatted rich text was part of a report based on a DIY form.

Test on reports displays as intended - formatted

 

Copyright © 2022. Agile Frameworks, LLC. All Rights Reserved. Proprietary and Confidential.